GY801-AOpen entrance; no sliding door listed
GY801-A provides the shared box-form enclosure with an open entrance; no sliding door is listed in the confirmed baseline.
- Horizontal
- 2300 × 1148 × 1760 mm approx.
Rest & Wellness Pods · GY80 Series
GY80 Box Capsule Pods
Three single-guest box enclosures built around one horizontal shell and three equipment tiers. Compare entrance, fit-out, dimensions and site requirements before confirming a configuration.
- Series
- GY80 Box
- Models
- 3 variants
- Occupancy
- One person
- Form
- Standalone
Model matrix
One box enclosure, three equipment tiers
GY801-A, GY802-A and GY803-A share one horizontal box-form shell. Their confirmed differences centre on entrance treatment, ceiling tier and selected luxury equipment.
Equipment tierBox capsule model
GY802-ASafety sliding door with smart-card lock
GY802-A adds a safety sliding door with smart-card lock, internal latch, escape label and luminous instruction label.
- Horizontal
- 2300 × 1148 × 1760 mm approx.
GY803-ASafety sliding door with smart-card lock
GY803-A adds a luxury ceiling, automatic smart fragrance diffuser and independent in-pod smoke alarm to the smart-door platform.
- Horizontal
- 2300 × 1148 × 1760 mm approx.
* Approximate outer dimensions describe the standalone enclosure. GY80 has no listed upper/lower stacked-set or ladder envelope; confirm delivery route, entrance clearance and furniture before production.
Series advantages
Four reasons to specify GY80
Standalone box enclosure
The larger box-form shell creates a self-contained single-guest room envelope rather than a conventional ladder-based capsule stack.
Three equipment tiers
GY801-A, GY802-A and GY803-A progress from open entry to smart sliding-door and luxury fit-out packages within one shell profile.
Multi-scene fit-out potential
The enclosure can be planned for sleep, staff rest, massage, gaming, livestream or wellness use when the required furniture is confirmed separately.
Integrated cabin environment
Low-voltage controls, charging, lighting, negative-ion functions and three-module adjustable circulation support the confirmed box-capsule baseline.
Entrance and fit-out planning
Choose the equipment tier, then confirm the use scenario
Open-entry baseline
GY801-A is the Light Luxury baseline with an open entrance; no sliding door is listed in the confirmed configuration.
Horizontal onlySmart sliding-door tiers
GY802-A and GY803-A use a safety sliding door with smart-card lock and safety labels. Confirm door travel and emergency access.
Horizontal onlyNo vertical or stacked layout
GY80 is a standalone horizontal enclosure. No vertical, upper/lower set or ladder dimensions are listed for this series.
Furniture is configuration-specific
Mattress, recliner, massage chair, gaming furniture, livestream desk or wellness equipment is supplied only when included in the confirmed order.
Project-specific options
Plan the furniture and sense of openness
These options are reviewed against the selected model, room plan and confirmed order. They are not standard equipment on every GY80 enclosure.
Recliner-ready configuration
GY80 is the recommended starting point for projects requiring a recliner, massage chair or wellness seat. Provide the chair dimensions, fully reclined footprint, power requirements and access clearances before configuration approval.
Furniture is included only when listed in the confirmed order.Optional door-side viewing window
A small door-side viewing window may be reviewed for guests who prefer greater visual openness inside an enclosed pod. Its dimensions, position, panel material, privacy treatment and structural feasibility must be confirmed for the selected model before production.
Project-specific option · Final size and location require approval.Best-fit projects
Where GY80 works best
GY80 suits projects that need a larger self-contained box enclosure with a configurable interior rather than a conventional capsule-bed stack.
Each use case is planning guidance. Final occupancy, furniture, accessibility, fire-safety and operating requirements must be approved for the destination project.
- 01overnight sleep or staff-rest enclosures
- 02VIP massage, recliner or wellness rooms
- 03gaming capsules and esports setups
- 04livestream rooms and compact content studios
Site coordination
Electrical, ventilation and materials
Confirm utilities, ventilation, entrance treatment and the loads created by the selected furniture or use-specific equipment.
Electrical
110-240 V AC input feeds a 12 v low-voltage cabin system. The buyer must confirm local voltage, frequency, plug/socket standard and connection method before production.
Ventilation
Adjustable circulation, approximately 30 m³/h, with three circulation modules in the documented GY80 baseline. Enclosure circulation does not replace building HVAC or room fresh-air design.
Materials and flame-retardant options
ABS outer shell with a metal structural frame. General ABS is available, with V2 or V0 ABS subject to final configuration and matching material evidence. A component report is not whole-pod fire certification.
Model-specific installation support
GY80 assembly guidance follows the confirmed configuration
Assembly steps, components and connection details vary by series and order. GEELYE supplies the applicable video or drawings and provides remote guidance after the model, configuration and project scope are confirmed.
Request installation guidanceBefore configuration
What the buyer needs to provide
Include the selected GY80 tier and intended use, furniture, room and delivery-route data so GEELYE can check feasibility, utilities and configuration-specific packing.
- project country, building type and intended use scenario
- dimensioned room plan, ceiling height and site photographs
- enclosure quantity and selected GY80 model
- furniture, mattress, recliner, gaming or wellness-equipment specification
- local voltage, frequency and plug/socket standard
- room HVAC and ventilation conditions
- delivery route dimensions and unloading restrictions
- requested colour, ABS grade, custom functions and local compliance requirements
Commercial terms
Confirmed Ordering & Delivery Terms
Use these published terms as the starting point for a GEELYE quotation. The selected model, configuration, named port and final order scope are confirmed in the quotation.
Review Certification Scope ↗Published material and component documents do not certify the complete pod.- MOQ
- 1 set
- Trade term
- FOB
- Sample lead time
- 15 days
- Bulk lead time
- 15–30 days
- Sample
- Sample fee required
- Packaging
- Paper-based packaging
- Installation
- Customer installation · video provided
Include with your inquiryProduct type or series, estimated quantity, destination or named port, room dimensions or plan, required configuration and target schedule.
Request a Product QuotationCommercial handover
Packaging, shipping, installation and warranty
Manufacturer: Byeast International Group CO.,Ltd
Packaging
Packaging method, carton count, packed dimensions and gross/net weight are provided after the final configuration is confirmed.
Shipping
FOB terms; the named port is confirmed in the quotation or sales contract.
Installation
Customer installation; GEELYE provides an installation video and written instructions.
Warranty
Two-year warranty. Scope, start date and exclusions are confirmed in the quotation or warranty terms.
Plan a GY80 project
Request a QuoteSend the room, use scenario and fit-out brief.
GEELYE can review enclosure quantity, entrance package, furniture, utilities, delivery access and material grade against the project requirements.